Rapido 38507 HO EMD GP38 Low Nose DCC/Sound Baltimore & Ohio #3824 (blue, yellow)

Description

The Rapido Trains HO Scale EMD GP38 Low Nose with Sound and DCC is modeled after the extremely popular 2,000-horsepower locomotives introduced in 1966. General Motors' Electro-Motive Division achieved success pretty early on, having developed and marketed a variety of 4-axle road switchers beginning with the GP7. By the mid-Sixties, EMD unveiled the latest Geep - the 2000 horsepower GP38. This was a non-turbocharged locomotive, similar in appearance to the earlier GP35. The GP38 had two radiator fans and paired exhaust stacks. The GP38 was longer than the GP35 and featured a new style radiator grille and a straighter sill and redesigned fuel tank. As with other locomotives, GP38s could be ordered with, or without, dynamic brakes, as well as a variety of other options (a few had dual control stands, steam generators for passenger service, some railroads specified their own lighting options and short hood options). 16-645 prime mover and a D32 direct current (DC) generator, similar to all the other locomotives produced previously by EMD. The push to higher horsepower, however, necessitated larger DC generators and in 1971 EMD introduced a new option for the GP38 - an AR10 alternating current (AC) alternator in place of the generator. This was a solution to the space problems encountered by the large generator, because alternators were smaller, yet offered the same electrical capacity. And thus was born the GP38AC, which are externally identical to the GP38. The GP38 was a popular engine, filling a niche for railroads requiring a locomotive for lighter duty and for use on trackage that was often not for high-speed mainline trains. As such it was purchased for a number of shortlines and a small number of industrial users. As a number of Class I railroads operate a lot of branch lines, the GP38 was also popular with these larger railroads as well.
 
The HO Scale EMD GP38 Low Nose is loaded with roadname-specific details and features appropriate truck sideframes, headlight placement, dynamic brake placement, a operating headlights, class lights and auxiliary lights. This sound-equipped EMD GP38 is equipped with a full-featured sound and DCC decoder with accurate sounds recorded from the prototype.

Rapido 38507 HO EMD GP38 Low Nose DCC/Sound Baltimore & Ohio #3824 (blue, yellow)

Product form

Scale:

MSRP:

$279.95

SKU: RAP38507

Out of stock

Product Inventory
loading..

    • Guaranteed secure & safe checkout.

      shop pay

    Description

    The Rapido Trains HO Scale EMD GP38 Low Nose with Sound and DCC is modeled after the extremely popular 2,000-horsepower locomotives introduced in 1966. General Motors' Electro-Motive Division achieved success pretty early on, having developed and marketed a variety of 4-axle road switchers beginning with the GP7. By the mid-Sixties, EMD unveiled the latest Geep - the 2000 horsepower GP38. This was a non-turbocharged locomotive, similar in appearance to the earlier GP35. The GP38 had two radiator fans and paired exhaust stacks. The GP38 was longer than the GP35 and featured a new style radiator grille and a straighter sill and redesigned fuel tank. As with other locomotives, GP38s could be ordered with, or without, dynamic brakes, as well as a variety of other options (a few had dual control stands, steam generators for passenger service, some railroads specified their own lighting options and short hood options). 16-645 prime mover and a D32 direct current (DC) generator, similar to all the other locomotives produced previously by EMD. The push to higher horsepower, however, necessitated larger DC generators and in 1971 EMD introduced a new option for the GP38 - an AR10 alternating current (AC) alternator in place of the generator. This was a solution to the space problems encountered by the large generator, because alternators were smaller, yet offered the same electrical capacity. And thus was born the GP38AC, which are externally identical to the GP38. The GP38 was a popular engine, filling a niche for railroads requiring a locomotive for lighter duty and for use on trackage that was often not for high-speed mainline trains. As such it was purchased for a number of shortlines and a small number of industrial users. As a number of Class I railroads operate a lot of branch lines, the GP38 was also popular with these larger railroads as well.
     
    The HO Scale EMD GP38 Low Nose is loaded with roadname-specific details and features appropriate truck sideframes, headlight placement, dynamic brake placement, a operating headlights, class lights and auxiliary lights. This sound-equipped EMD GP38 is equipped with a full-featured sound and DCC decoder with accurate sounds recorded from the prototype.

    Size chart

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    R
    Rick Walls
    Awesome Locomotive

    I first purchased the CSX version of the GP38 and as soon as I finished testing out that version I immediately ordered the B&O version! These are my first Rapido purchases ever and they both are incredible! From the detail to the realistic settings straight out of the box, they instantly became my favorite locomotives. I hope they release a C&O version soon!

    Recently viewed products

      • Fast Shipping - Most Orders Ship Same or Next Day
      • Fair Pricing - Ultra Low Pricing
      • Great Stock - Tens of Thousands of Products In Stock

      © 2024 Fusion Scale Hobbies, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Meta Pay
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account