ESU Speakers

ESU speaker 15mm x 11mm 8 Ohms With Sound Chamberset

With our new modular speaker baffle set suitable for a single miniature speaker you can easily assemble your tailormade speaker baffle for two miniature speakers. Both - diameter and height - can be individually adapted to suit your needs. Even with one speaker the audio pressure is considerably better than...

Speakers for Decoders with LokSound V4.0 and LokSound micro V4.0When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms....

With our new modular speaker baffle set you can easily assemble your tailormade speaker baffle suitable for two miniature speakers. Both - diameter and height - can be individually adapted to suit your needs. Considerable audio pressure and excellent sound fidelity can be generated by employing two speakers wired in...

LokSound V4.0 and LokSound micro V4.0 decoders need the a speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use a 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the...

ESU Loudspeaker 20mm x 40mm square 4 ohms With Sound Chamber 50334

ESU LokSound 20mm Speaker 4ohm with Sound Chamber

ESU LokSound 14x12mm Speaker 8ohm with Sound Chamber

The LokSound 5 micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

ESU Speaker 29mm x 65mm x 14mm, square, 8 Ohm, resonator

The LokSound 5 micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

ESU LokSound 5 micro DCC/MM/SX/M4 "generic", 6-pin NEM651, Retail, with Speaker 11x15mm, gauge: 0, H0

ESU LokSound 50344 Speaker 24mm x 55mm x 8.6mm 8 Ohm Resonator

The LokSound 5 micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small HO vehicles. All...