ESU

LokSound V4.0 and LokSound micro V4.0 decoders need the a speaker with an impendance of 4 Ohms. With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use a 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the...

Speakers for Decoders with LokSound V4.0 and LokSound micro V4.0When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0, LokSound micro V4.0 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms....

The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it is more compact than its predecessor it has twice the capacity (0.22F/5.5V).

If the loco in question features no digital interface and you don't want to cut off the interface-plug of your loco, simply make use of one of our harnesses. Solder in the harness and then plug in the decoder.DCC cable colored, super-thin cable comes in 30cm lengths.Features 1 cable of...

Decoder Specifications:Size: 21.5 mm x 15.5 mm x 6.5 mm (0.85 in x 0.61 in x 0.26 in)Connection: NEM660 21MTC Integral ConnectorMotor Rating: NA - Function and Sound onlyBEMF: NAFunctions: Up to 12 amplified outputs for special functions (total: Up to 15 outputs)Sound:32-bit processorDigital class "D" amplifier with up to...

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge...

The LokSound 5 micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

ESU LokSound 5 micro DCC/MM/SX/M4 "generic", 6-pin NEM651, Retail, with Speaker 11x15mm, gauge: 0, H0

The LokSound 5 micro is actually a "small miracle". With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. Open...

ESU 59029 LokPilot 5 Basic DCC, 21MTC While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed...

LokPilot 5 Fx Micro Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM662 Next18 Integral ConnectorDecoder Specifications:Size: 13.0 mm x 9.2 mm x 2.9 mm (0.51 in x 0.36 in x 0.11 in)Interface: NEM662 Next18 Integral ConnectorMotor Rating: NA - Function-OnlyBEMF: NAFunctions: 6 amplified outputs for special functions, 2 Logic-level outputs or Servo...

LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM658 PluX22 Integral ConnectorDecoder Specifications:Size: 21.4 mm x 15.5 mm x 4.5 mm (0.84 in x 0.61 in x 0.18 in)Interface: NEM658 PluX22 Integral ConnectorMotor Rating: NA - Function-OnlyBEMF: NAFunctions:NEM652 8-pin Wired Plug - 10 amplified outputs for special functionsNEM658 PluX22...

LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM660 21MTC Integral ConnectorDecoder Specifications:Size: 21.4 mm x 15.5 mm x 4.5 mm (0.84 in x 0.61 in x 0.18 in)Interface: NEM660 21MTC Integral ConnectorMotor Rating: NA - Function-OnlyBEMF: NAFunctions:NEM652 8-pin Wired Plug - 10 amplified outputs for special functionsNEM658 PluX22...

ESU 59610 LokPilot 5 DCC/MM/SX/M4 8-pin NEM652

Decoder SpecificationsSize: 21.4 mm x 15.5 mm x 4.5 mm (0.84" x 0.61" x 0.18")Connection: NEM660 21MTC Integral ConnectorMotor Rating: 1.5A ContinuousBEMF: Motor control with 50 kHz clock frequencyFunctions: 10 amplified outputs for special functions, 4 Logic-level outputs, 2 Servo Outputs (total: Up to 16 outputs)Protocol: DCC with RailComPlus, M4,...

ESU 59824 LokPilot 5 micro DCC PluX16

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it...

May be you know the situation: In front of you there is a digital decoder on the workbench, and before you undertake its complicated installation into the loco, you would like to know if the decoder works as advertised. But, how do you test it? The Profi-Tester helps you: It’s...

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to...

LokSound 5 FX Standard Multi-protocol (MM/DCC/SX) Function-Only Sound Decoder - NEM652 8-Pin Wired PlugDecoder Specifications:Size: 21.5 mm x 15.5 mm x 6.5 mm (0.85 in x 0.61 in x 0.26 in)Connection: NEM652 8-pin Wired PlugMotor Rating: NA - Function and Sound onlyBEMF: NAFunctions: Up to 12 amplified outputs for special...